Hana ML / Hana MH / low & high / Neu
Phantastischer Klang des Überfliegers seiner Preisklasse!!! Bezahlbares, japanisches Kleinod in Handarbeit hergestellt. Als Low output für MC Eingänge oder als High Output Variante für MM Phonostufen. In unserer Demo!
"Circa 1.200€ is not cheap, and cartridges are hard to value, but in my limited experience if you want a full-blooded cartridge of this sort of quality nothing else comes close."
...as it stands, this is the best £3,000–£4,000 cartridge you can buy…for £995!
Building upon the foundation of the critically acclaimed HANA sound, the ML aspires toward affordable perfection and represent the further evolution of the “Brilliant and Gorgeous” quality that has earned HANA its worldwide reputation.
M Series Nude Microline stylus – Higher Specification Part
Befitting its name, the M Series uses a Nude Microline stylus, mimicking the cutting stylus and fitting more precisely into the vinyl groove. This enhances tracking to capture the most delicate musical details with better frequency reproduction, stereo imaging, and resolution.
High Purity copper wire – Higher Specification Part
Very high-purity copper wire is used for winding the ML coil with a new low impedance generator for optimized performance with a broader range of phono preamps
Delrin© cartridge body – Advanced Materials
The M Series cartridge body is injection molded from Delrin©, a high-tech polymer with improved mechanical characteristics for better resonance damping, to reveal more low level information and enhance dynamic range.
Cryogenic Processing – Unique Technical Treatment
Cryogenic processing is Cold Annealing at near absolute zero temperature that restructures metals at the molecular level, especially important in the Alnico based magnetic electro-motive circuit (cartridge signal generator). The M Series parts treated include the front yoke as well as center and rear components. The result is a more precise and controlled magnetic flux field for greater linearity and musical sound quality.
Brass Cap with Threaded fittings – Superior Mechanical Interface
The Delrin© cartridge body features an integral machined brass cap providing constrained mode layer damping and its heavier 9.5 gram weight provides expanded compatibility with a wider range of tonearms and turntables.
Built into the M Series Delrin© cartridge body are metal threaded fittings for headshell mounting hardware, offering easier attachment and a superior mechanical interface for better bass and dynamics.
* Stylus: Microline
* Cantilever: Aluminum
* Magnetic Circuitry: Pure Iron/Cryo Treatment
* Coil Wire: High Purity Copper
* Cartridge Housing: POM (Delrin) / Brass
* Output Level: 0.4mv/1kHz
* Output Balance: <1dB/1 KHz
* Trackability: 70 µm/2g
* Channel Separation: 30dB/1kHz
* Frequency Response: 12-45,000Hz
* Impedance: 7Ω/1kHz
* Suggested Load Impedance: >100Ω
* Magnet: Alnico
* Vertical Tracking Force: 2g
* Cartridge Weight: 9.5g
* Height: 16.3mm
* Body Color: Black w/Brass Plate
Utnivå vid 1000 Hz 5cm/sek: 2 mV
Kanalbalans (1 kHz): >1 dB
Kanalseparation vid 1kHz: 30 dB
Frekvensomfång: 12-45 000 Hz
Intern impedans: 130 Ohm
Rekommenderad last: 47 kOhm
Rekommenderat nåltryck: 2,0 gram
Vikt: 9,5 gram