Goldring G 1012 / MM Tonabnehmer mit Garantie

 

Beliebtes Goldring MM-System mit scharfer Nadel und ausgewogenem Klangbild. Hier testweise verbaut im Rega Planar 3/RB 300. Sehr guter Zustand, 1 Jahr Garantie. Upgrade auf 1022/1042 durch Nadeltausch jederzeit einfach möglich.

Owner Bewertung: ****/*

"...It is clean, clear and balanced in its frequency range. The sound is amazingly detailed, the bass is tight and the treble is clear without sibilance. The midrange is clear and the sound as a whole is more neutral than, for example, the warm Nagaoka MP-110. On my player it tracks well with a 1.75 g stylus weight...."

Review

Great with Rock music, the 1012 is the best value low-price MM.

 

 

Technik:

Frequency response: 20Hz to 20kHz

Channel balance: 2dB

Channel separation: 25dB

Sensitivity: 6.5mV

Equivalent tip mass: 0.45mg

Vertical tracking angle: 24 degrees

Load resistance: 47 kohms

Load capacitance: 150 to 200pf

Weight: 6.3g

Tracking force: 1.5 to 2.5g (1.75 nom)

The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.

High Efficiency Magnetic Circuit

Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.
Reduced Moving Mass

The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics.